Product Introduction:4 Axis Lathe Controller(Turning Controller) With PLC
ECN4000TL is a 4 axis Lathe Controller(Turning Controller),it applies real-time multi-task control technology and hardware interpolation technology, and is able to perform µm level precision motion control and PLC logic control.it is an advanced CNC motion controller with PLC.
Control Axis:
●Control axis: 4 axis (X, Z, Y,A)
l Interpolation axis: X, Y, Z,linear interpolation; X,Y and Z three axes linear and spiral Interpolation, any two axes arc interpolation;
●PLC control axis:4 axis
Feeding axis function:
●Minimum command unit: 0.001mm or 0.0001mm can be selected
●Position command range: ±99999999 × minimum command unit
●Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; (0.0001mm, the maximum speed is 24m/min)
●Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment;
●Feeding override: total 16 levels: 0~150%, real-time adjustment;
●Interpolation mode: linear, arc and spiral interpolation and rigid tapping
●Auto chamfer
Acceleration and deceleration function:
●Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selective
●Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selective
●Tapping: Acceleration or deceleration in linear type/index type or front/rear is selective
●The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
Spindle function:
●Analog voltage 0V~10V output in two channels, support two-spindle control
●Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r~5000p/r)
●Transmission ratio between encoder and spindle is:(1~255):(1~255)
●Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm~9999rpm.
●Spindle override: total 8 levels: 50%~120%, real-time adjustment
●Spindle constant surface speed control
●Tapping cycle/rigid tapping
Tool function:
●Tool length compensation
●Tool wearing compensation
●Tool life management
Precision compensation:
●Backlash compensation
●Pitch error compensation in memory type
PLC function:
●PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.
●PLC program communication download
●Support PLC warning and PLC alarm
●Support many PLC programs (maximum 16), the current running PLC program can be selected
●Basic I/O: input in 40 points/output in 32 points
Man-machine interface:
●7.4″large screen LCD, the resolution is 234×480
●Display in Chinese, English, Spanish or Russian, etc
●Display in processing path and it can real-time zoom in and out, translation and scroll lock.
●Real-time clock
Operation management:
●Operation mode: Edit, auto, MDI, machine zero-return, MPG/single step, manual and DNC.
●Operation authority of multiple levels management
●Alarm record
Editing program:
●Program capacity: 40M, 10,000 programs (including subprograms, macro programs)
●Editing function: program/block/characters research, rewrite and delete
●Program format: ISO code, support macro command programming in sentence type
●Calling program: It supports macro program with parameter, subprogram nesting of 4 layers
Communication function:
●RS232: Files of part program and parameter, etc can be transmitted in two-way, DNC real-time processing, support PLC program, serial ports of system software upgrade.
●USB: File operation, directly processing files, support PLC program, system software upgrade in flash disc.
Safety function:
●Emergency stop
●Hardware travel limit
●Software travel limit
●Data restoring and recovering
Dimension:4 Axis Lathe Controller(Turning Controller) With PLC
G/M Code
code | Function | code | function |
G00 | Rapid traverse(positioning) | G50 | Float coordinate setting |
G01 | Linear Interpolation | G54-G59 | Set workpiece coordinate |
G02 | Clockwise circular interpolation | G65 | Macro calling(no modal) |
G03 | Anti-clockwise circular interpolation | G71 | Axial roughing cycle |
G04 | Pause/ Orientation | G72 | Radial roughing cycle |
G17 | Plane selection | G73 | Closed cutting cycle |
G18 | Plane selection | G70 | Finishing cutting cycle |
G19 | Plane selection | G74 | Axial grooving cycle |
G10 | Data input available | G75 | Radial roughing cycle |
G11 | Data input cancel | G76 | Multiple threading cutting |
G20 | Inch unit | G80 | Rigid tapping status cancel |
G21 | Metric input | G84 | Axial rigid tapping |
G28 | Return to home position | G88 | Radial rigid tapping |
G30 | Return to machine 2,3,4 ref.point | G90 | Axial cutting cycle |
G31 | Skip function | G92 | Threading cycle |
G32 | Constant pitch threading | G94 | Radial cutting cycle |
G33 | Z axes tapping cycle | G96 | Constant speed cutting |
G34 | Variable pitch threading | G97 | Constant speed cutting cancel |
G40 | Cancel tool nose radius compensation | G98 | Feed per minute |
G41 | Left tool nose radius compensation | G99 | Feed per revolution |
G42 | Right tool nose radius compensation |
Product Service:
ECON provide technical service from start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.
Payment and Delivery:
ECON supports T/T,Paypal,Western Union to make payment. We can arrange express,air and sea shipment,we have professional team to deal with logistic.
Recommendations: