Product Introduction:closed loop stepper motor nema23 torque 2.2Nm
ECON offers hybrid servo motors (stepper motors with encoders) from NEMA 23 to 42 with torque up to 12 Nm .These hybrid servo motors are integrated with 1,000-line incremental encoder.
When driven by ECON's hybrid servo drives, the system can fully close the position loops between the drive and motor and eliminate loss of movement synchronization with features of no loss of steps and no torque reservation. Compared with servo systems, easy servo systems have much higher low-speed torque that servo systems lack, significantly lower cost, no overshooting, and no hunting.
ECON’s easy servo motors can also be implemented as standard stepper motors with encoders, and driven by stepper drives with the option of output encoder signal to a motion controller, PLC, or external device.
This series easy servo motors are available in NEMA 17 to 34 frame sizes with 0.9 - 12 Nm torque. It was designed to be powered by ECON’s easy servo drives taking max 80 DC / AC voltage input.
It matches with hybrid servo driver TS808D.Below is the specification of this model .
Product Technique Feature:closed loop stepper motor nema23 torque 2.2Nm
Step Angle 1.8º
Insulation resistance 500VDC100MΩ Min
Insulating strength 500VAC 50Hz 1mA 1 Min
Environment temperature -20~+40ºC
Temperature rise 80ºC Max
Product Technical Data: closed loop stepper motor nema23 torque 2.2Nm
Motor encoder outlet definition(DB15 Pin male connector)
Product Service:closed loop stepper motor nema23 torque 2.2Nm
ECON provide technical service from start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.
Payment and Delivery:closed loop stepper motor nema23 torque 2.2Nm
ECON supports T/T,Paypal,Western Union to make payment. We can arrange express,air and sea shipment,we have professional team to deal with logistic.
Recommendations:closed loop stepper motor nema23 torque 2.2Nm