LCD Display EtherCAT Hybrid Servo Driver

LCD Display EtherCAT Hybrid Servo Driver

New generation EtherCAT hybrid servo drivers,it has below outstanding features: 1.AC and DC power in one driver,Max voltage is 100V,and Max current is 8A 2.LCD display,can show any data that needed 3.Improved speed and performance,realize four-phase full current sampling 4.Stable,communication full-isolated,signal full-isolated,built-in power input positive and negative anti-reverse function 5.With USB debugging function,can set more than 100 parameters

Chat Now

Product Details

Product Overall Description

EHS-808H is Econ technology's latest EtherCAT hybrid servo driver with LCD displayy, which adopt the latest floating-point 32-bit MCU digital processing technology, the advanced vector control technology drive the motor with low heating ,low noise and extra smoothly.The user can set any ID address within 1-255 and any current value under the rated current, it can be matched with different of size motors(from Nema17--Nema34) to applied for variable applications. the drive can auto-tuning for matching the motor when power up, which can automatically generate optimal operating parameters for different motors to maximize the performance of the motor.


Common Features

  • New floating point 32bit MCU technology

  • Serial Port And Auto Tune Function

  • Advanced vector control technology

  • High torque at starting and low speed

  • 5 channels opto-coupler isolation input,2 of them are high speed opto-coupler isolation input

  • 4 channels opto-coupler isolation OC output

  • 2 channels analog inputs

  • Communication Frequency up to 100MHz

  • DIPs can set 127 IPs or automatic allocate IP

  • Current setting range 0.5-8A

  • Smooth movement and extra low noise

  • The supported encoder can be 500ppr—5000ppr

LCD content and status display

The LCD is on after power up, and shows some content as below chart

No.

Content

Details

Description

1

Motor frame size

28/42/57/60/86mm

Display the current motor type

2

Pulse/Revolution

Pulse

Display the current setting of pulse /revolution

3

Current speed

RPM

Display the current working speed of motor

4

Function mode

FOC/PM/LEAD/FULL CURRENT

Display the current Control algorithm mode


Electrical Specifications

Description

EHS-808H

Min

Typical

Max

Unit

Output Current(peak)

0.5

-

8.0

A

Input Voltage(DC)

15

24/36/48/68

80

VDC

Input Voltage(AC)

20

36

50

VAC

Control Signal Input Current

6

10

16

mA

Control Signal Interface Electricity

4.5

5

28

Vdc

OC output Pull-Up voltage

5

-

24

Vdc

Ether-CAT communication frequency

-

100

-

MHz

Insulation Resistance

100



MΩ



Product Dimension (Unit:mm)

Previous:Hybrid Servo Driver With LCD Display Next:Nema 17 0.8Nm Closed Loop Stepper Motor

Inquiry