Product Features: nema23 integrated dc brushless servo motor drive
●Operation voltage：DC power supply input 15—50VDC,the recommended power supply is 36VDC
●The max continuous output current is 8A,peak current is 22A（3 times over-load capacity）
●Support differential and single end pulse+direction command, support position/speed/torque control mode
● Adopt advanced magnetic oriented control technology(FOC) and space vector PWM control technology (SVPWM)
●The micro step(pulse/round) can be set by ProTuner or DIP switches(gear ratio)
●Can select 100W,140W and 200W dc brushless servo motor
● 0—5VDC analog input for speed mode, and support IO speed control function.(customized)
●Support over-voltage, under-voltage, over-current, over-error protections
●Single/dual pulse mode, pulse valid edge optional
●Control command MAX frequency 500KHz(default 200KHz)
●Pulse, direction and enable signal input connection electric compatible 4.5~28V
●Support RS232 serial port, but need to use special USB cable to adjust
●Work smoothly, high torque output at medium/high speed; fast response ,and low heating ,low vibration.
Product Applications:
Successfully implemented IV57 integrated hybrid servo systems in various equipment, such as desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, Robots, packing machine, electronic assembly & inspection equipment, labeling equipment, pick & place machines, X-Y tables
Product Parameters:
Drive Model And Selection Table | |||
Drive Model | IV57-10 | IV57-14
| IV57-20 |
Rated Power | 100W | 140W
| 200W |
Vector over-load Current | 16A | 18A
| 22A |
MAX acceleration | 100 rpm/ms | ||
Speed control accuracy | ±2 rpm | ||
Voltage | 15~50VDC,recommend 36V | ||
Over-voltage protection value | 68vdc±2 | ||
Control Mode | 32bit DSP vector FOC control technology | ||
Pulse MAX Frequency | 500KHz(default is 200KHz) | ||
Protection Function | Over-current, over-voltage, under-voltage, over-error alarm | ||
Input Signal | Pulse,direction,enable differential/single-end connection signal, connection electric compatible 4.5~28vdc,no need to connect external limit current resistor | ||
Output Signal | Alarm/place OC signal output, 100mA output,need to connect pull-up resistor,MAX pull-up voltage 24Vdc | ||
Position error control accuracy | ±1 Pulse | ||
Micro-step | Default 4000/rev, set micro-step by ProTuner or DIP switches(200-51200) | ||
Product Connection:
Product Setting:
Pluse/REV Table
Pul/REV | SW1 | SW2 | SW3 | SW4 |
Default | ON | ON | ON | ON |
800 | OFF | ON | ON | ON |
1600 | ON | OFF | ON | ON |
3200 | OFF | OFF | ON | ON |
6400 | ON | ON | OFF | ON |
12800 | OFF | ON | OFF | ON |
25600 | ON | OFF | OFF | ON |
51200 | OFF | OFF | OFF | ON |
1000 | ON | ON | ON | OFF |
2000 | OFF | ON | ON | OFF |
4000 | ON | OFF | ON | OFF |
5000 | OFF | OFF | ON | OFF |
8000 | ON | ON | OFF | OFF |
10000 | OFF | ON | OFF | OFF |
20000 | ON | OFF | OFF | OFF |
40000 | OFF | OFF | OFF | OFF |
Product Dimension:
